Application
1 litre Rad-Save per 100 litres of system water
Rad-Save Central Heating Corrosion Inhibitor Molybdate Based (1 litre)
£7.90 (+VAT)
Out of stock
PRODUCT DETAILS
SafeSol, central heating corrosion inhibitor, is an excellent product for use in domestic systems. It has BuildCert approval. This molybdate inhibitor, dosed at the correct concentration protects against corrosion and scale. It also prevents the formation of magnetite (iron oxide compound) sludge. This inhibitor will also protect a variety of metals including steel, cast iron, brass and aluminium. It is a single chemical inhibitor which makes it easy to monitor and control.
Dosing the Central Heating Corrosion Inhibitor
Corrosion inhibitor should always be dosed to a clean system. The dose rate for this product is 1 litres for every 100 litres of system water which will give 100ppm molybdate. The system pH should remain below 8.4
It is important that new systems are flushed with a suitable cleaner such as Rad-X and old systems are flushed with a suitable rust remover prior to dosing with corrosion inhibitor.
Systems that operate below 60C such as underfloor heating or chilled systems should be dosed with a biocide to ensure microbiological control.
Testing
The concentration of the molybdate product must be monitored after commissioning and then annually during the life of the system. This is in line with British Standard BS7593:2019.
Molybdate concentration can be measured easily using a simple test kit.
APPLICATIONS
- Corrosion and scale prevention in heating systems
FEATURES
- Providing corrosion protection for domestic central heating systems.
- Excellent corrosion control for most common metals of construction
- Preventing scale build up
- Preventing the build up of sludge
- Suitable for hard and soft water
- Low toxicity product with a near neutral pH
BENEFITS
- Increased heating system life
- Increased energy efficiency of the system
- Prevention of cold spots
- Reduces the risk of pipework blockages
How to dose Rad-Save to a central heating system
For product queries or questions, or for international orders, please get in touch.
PRODUCT DETAILS
SafeSol, central heating corrosion inhibitor, is an excellent product for use in domestic systems. It has BuildCert approval. This molybdate inhibitor, dosed at the correct concentration protects against corrosion and scale. It also prevents the formation of magnetite (iron oxide compound) sludge. This inhibitor will also protect a variety of metals including steel, cast iron, brass and aluminium. It is a single chemical inhibitor which makes it easy to monitor and control.
Dosing the Central Heating Corrosion Inhibitor
Corrosion inhibitor should always be dosed to a clean system. The dose rate for this product is 1 litres for every 100 litres of system water which will give 100ppm molybdate. The system pH should remain below 8.4
It is important that new systems are flushed with a suitable cleaner such as Rad-X and old systems are flushed with a suitable rust remover prior to dosing with corrosion inhibitor.
Systems that operate below 60C such as underfloor heating or chilled systems should be dosed with a biocide to ensure microbiological control.
Testing
The concentration of the molybdate product must be monitored after commissioning and then annually during the life of the system. This is in line with British Standard BS7593:2019.
Molybdate concentration can be measured easily using a simple test kit.
APPLICATIONS
- Corrosion and scale prevention in heating systems
FEATURES
- Providing corrosion protection for domestic central heating systems.
- Excellent corrosion control for most common metals of construction
- Preventing scale build up
- Preventing the build up of sludge
- Suitable for hard and soft water
- Low toxicity product with a near neutral pH
BENEFITS
- Increased heating system life
- Increased energy efficiency of the system
- Prevention of cold spots
- Reduces the risk of pipework blockages
How to dose Rad-Save to a central heating system
For product queries or questions, or for international orders, please get in touch.
£7.90 (+VAT)
Additional Information
To make life easier we have added downloadable help sheets that you can print and keep.
Rad-Save SafeSol Domestic Central Heating Inhibitor MSDS
Rad-Save Domestic Central Heating System Inhibitor Help Sheet
Delivery Information
Central heating chemicals will be shipped using next working day delivery for Mainland UK. We use UK Mail for this option. Unfortunately due to the distances involved we can only offer standard delivery for the Highlands, Islands and Northern Ireland.
Please see the shipping table for category two products below. This is based on weight of goods ordered. Central heating chemicals are classified as a category two product. Please order before 1pm for next working day delivery.
